Retension or Buffer Tank for Borewell Storage &Rechage
(Recharge of Shallow/DeepAquifers)
Sizing Of Modular RWH Storage Tank
Based on:
No. of person in the Household
Per capita water requirement
No. of days for which water isrequired
Irrigation Water Requirement
Advantages Of Ecorain Tanks Over RCC
Thousands of Gallons Underground storage in couple of Days against months of construction time for RCCTanks
100% Environment Friendly Recycled non Degradable Polypropylene with option of Virginmaterial.
Light Weight hence no need of heavy machinery and skilledlabour for construction.
Supplied in Kit for ease ofTransportation.
Site Space utilization and Minimum sitedisruption.
Can be placed under Landscape, Parking andPathways.
Cost effective, Low Maintenance solution for Rain/Storm Water Management and reduces liabilityissues.
Heavy Load carryingCapacity.
Onsite Storm WaterManagement.
ECORAIN MODULAR TANK FOR RWH
Modular Structure for designflexibility.
Heavy load carrying capacity.
High void surface ratio for quicker filtration as against boulder and gravel soakpit.
Recharges ground water table through principle of infiltration.
Mitigation of downstreamflooding.
Latest addition Eco-Rainwater tank clips secure tanks widths and lengths even lock the modulartanks.
ECORAIN STORAGE TANK
ASSEMBLY OF ECORAIN TANK
Single Tank assembly
STEP 1
Install large pegs of one small plate info holes of one side plate.
STEP 2
Install large pegs of the second third and end small plates info holes of the side plate.
STEP 3
Place and align the second side plate on top of the small plates.
STEP 4
Rotate the tank such that the side plates are now on the sides and the top and bottom are open.
STEP 5
Place and align a large plate with the pegs of the vertical small plates . Use a 2X4 timber log and a dead weight hammer to tap the large plate into place.
STEP 6
Trun the tank upside down.place and align the second large plate with the pegs of the vertical small plates Use a 2X4 timber log and a dead weight hammer to tap the large plate into place.
ASSEMBLY OF ECORAIN TANK
Multiple Tank assembly
STEP 1
Repeat steps 1 through 5 for multiple tank Assembly
STEP 2
Place and align a large plate with the pegs of the vertical small plates . Use a 2X4 timber log and a dead weight hammer to tap the large plate into place.
STEP 3
Trun the tank upside down.place and align the second large plate with the pegs of the vertical small plates Use a 2X4 timber log and a dead weight hammer to tap the large plate into place.